Turn any photo into a sequin-by-sequin map for a shimmer wall: how many of each color to buy, a chart for every panel, and a printable build pack.
Sample image
1
Photo
From your camera roll or files. It stays on your device.
Brightness, contrast, saturation
2
Board size
Panel specs, backing and spares
3
Colors
Switch off any color you can't buy. Tap a swatch to match it to your real sequins.
Picks the colors that suit this photo best. You would need sequins made or printed in these colors.
Low gives flat blocks of color. High mixes neighboring colors for smoother shading, which reads best from across the room.
times
Sequins sell by the panel, so a color used a handful of times costs a whole panel. Dropped colors are replaced by their nearest match.
Turn on at least two colors.
Shopping list
Panel charts
In this panel
Each square is one sequin, seen from the front. Row 1 is the top row of pegs. Tap a panel on the preview or the small map to jump to it.
Take it to the workbench
What you need to build it
Materials
Backing grids. Plastic panels about 30 × 30 cm (11.8 in) with 100 pegs each, in clear or black. You need 36, one per panel on the map.
Sequins. Squares about 3 cm (1.2 in) with a hole at the top. Each one hangs loose on a peg, which is what makes the wall shimmer. They are sold already hung on single-color panels, 100 to a panel, and some listings add small bags of spares.
Joins. Panels clip together with the tabs on their edges. Add small zip ties at the corners on a board this size.
Support. A backdrop or pipe-and-drape stand for an event. For a board that leans or hangs like art, fix the panels to foam board or thin plywood. Plan for about .
For the build. The printed charts, a cup or tray for each color, painter's tape to label panels, and tweezers or a small hook.
Steps
Buy single-color panels to cover the counts in the shopping list. They supply the backing grids too.
Sort sequins by color. Label the back of each grid with its panel name, A1 at the top left.
Hang one panel at a time from its chart, working from row 1 down.
Lay the panels out face up in map order, clip them together, then lift the board onto its support.
Before you buy
Solid-color sequins give a pixel-art look. Fine detail such as eyelashes needs the image printed onto the sequins, which custom shimmer-wall makers offer. You can send them this preview as the artwork.
Mirror sequins reflect the room, so the colors here are close guides. Check them against the real sequins before a big order.
Faces need lots of sequins. If a face looks rough, add panels or zoom in on it.